DIY Bathroom Mirror Frame

Our Master Bathroom was built with a generic plain builder grade large mirror. While I love that the mirror is large, I hate how boring and unfinished the mirror is. If I were to replace the current mirror with new mirrors it would cost hundreds of dollars. Before I spent too much money, I decided to try to see if I could frame the mirror out myself. Follow me as I construct and design a DIY Bathroom Mirror Frame!

Lights above Bathroom Mirror!

The bathroom is the entryway to our amazing closet. If you missed my closet makeover, check it out here, Custom IKEA Closet. The current bathroom is boring and lacks character. For the first phase of the bathroom makeover we decided to start with the vanity area.

I found some amazing modern lights for above the mirror from Amazon! Lights are generally easy to install, however I ran into a little bit of a problem installing these lights. In true new build fashion, my builders left a huge hole behind the former lights which meant I had to patch a giant hole in the drywall.

The best part of patching this drywall was I got to try a new technique. After I patched the drywall with spackling and allowed it to dry, instead of sanding it smooth I used a technique called wet sanding. Take a damp cloth and rub the dried wall spackling until you get your desired look. Not only does this wet sanding technique save you time it also eliminates the mess! Definitely a win win and I would highly recommend it for your next project.

The Frame

Trying to find inspiration photographs for the mirror frame idea I had in my head was nearly impossible. When people think framed mirrors, the frames are usually big and bulky. However, I wanted something sleek modern and sexy for my mirror!

First, I went to the hardware store and picked out a thin light weight Polystyrene Baseboard Molding. The molding was 1/2-in x 0.75-in x 8-ft and I purchased two to complete my mirror, total cost for both was $9.96!

While at the store, I grabbed some black paint (I used Tricorn Black) and some clear construction adhesive. In total I spent $50.90.

Once home, I measured and cut the molding. Next, I painted all sides of the molding pieces and allowed them to dry for a day. After the molding was completely dry, I used the clear construction adhesive to glue the molding to the edge of my mirror.

After a little touch up paint the project was complete. This was a super simple inexpensive project and it turned out fabulous!!!!